RFWB-20/G On-wall button controller PLASTIC – 2 buttons

RFWB-20/G | On-wall button controller PLASTIC – 2 buttons

On-wall button controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).

RFWB-20/G: two buttons enable control of two units independently.

RFWB-40/G: four buttons enable control of four units independently.

The flat design with level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).

When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).

Sending a command is indicated by a red LED.

In LOGUS90 switch frame design (plastic, glass, wood, metal, stone).

Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.

Battery power supply (3 V CR 2032 battery – included in the supply) with battery life of around 5 years based on frequency of use.

Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.

Communication frequency with bidirectional protocol RFIO2.

RFWB enables communication (RFIO2) and can thus communicate with the CU3-02M.

Technical parameters

Number of channels: 2
Power supply: 3 V battery CR 2032
Design: LOGUS90
Colour: 85 x 85 x 16 mm
Protocol: RFIO2