(+035) 527-1710-70
NEWSLETTER
- The maximum possible load is 150 VA for 230 V and 75 VA for 120 V for each channel.
- The individual channels of the dimmer can be connected in parallel and thus increase the maximum output load at the expense of the number of outputs.
- Each of the output channels is individually controllable and addressable.
- By setting the min. brightness eliminates fl ickering of diff erent types of light sources, setting min. brightness and type of load is done using the PROG buttons.
- Electronic overcurrent, thermal and short-circuit protection, which switches off the output.
- 6 galvanically isolated inputs for wired buttons, which can be used to control the outputs independently of the RF.
- Communication with bidirectional RFIO2 protocol. The package includes an internal AN-I antenna, in case of placement of a sheet metal distribution element, you can use an external AN-E antenna to improve the signal.
Technical parameters
- Dimmable loads: R – L – C – ESL – LED
- Output: 12x MOSFET
- Output loads: 6x 150W (230V) / 6x 75W (120V)
- Protections: overheating and overload
- Housing: 6-MODULE
- Supply voltage (frequency): 230 V (50 Hz) or AC 120 V (60 Hz)
- Dimensions: 90 x 105 x 65 mm (3.5˝ x 4.1˝ x 2.6˝)
