- Control can be performed by: a) detectors, Controllers and System units iNELS RF Control b) by control signal 0(1)-10 V c) potentiometer d) existing button in the installation.
- 6 light functions – smooth increase or decrease with time setting 2 s -30 min.
- Thanks to setting the min. brightness by potentiometer, you will eliminate fl ashing of the LED and ESL light sources.
- The universal dimmer may be controlled by up to 32 channels.
- The programming button on the controller is also used for manual control of the output.
- The package includes an internal antenna AN-I , in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
- Memory status can be pre-set in the event of a power failure.
- Range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
- Communication frequency with bidirectional protocol RFIO2.
- The unit‘s three-module design with switchboard mounting.
Technical parameters
- Output: R – L – C – LED – ESL, 600 VA (230V); 300 VA (120V)
- Supply voltage (frequency): AC 230 V (50 Hz); AC 120 V (60 Hz)
- Design: 3-MODULE
- Dimensions: 90 x 52 x 65 mm
- Protocol: RFIO2