Wireless light dimmer – luxury
Combination of iNELS wall-mounted wireless controller and dimmer for regulation of all types of dimmable bulbs and light sources.
RFGB-240/W
- The wireless control – is used to control, lights, gates, garage doors, shutters, etc.
- The thickness is only 8 mm.
- 4 capacitive buttons allow you to control 4 components.
- Fast installation on any surface – the rear base allows screwing to the walls, gluing with double-sided tape, or just laying on the table
RFDEL-71B-SL
- The universal built-in dimmer is used to regulate light sources.
- They can be combined with detectors, controllers, iNELS RF Control, or system components.
- 7 light functions – smooth increase or decrease with time setting 2s-30 min. + additional function SWITCH OFF
- Thanks for setting the min. the brightness you will eliminate fl ashing of the LED and ESL light sources
- The universal dimmer may be controlled by up to 25 channels (1 channel represents 1 button).
- The connection of the existing button on the control input “S“ enables the combination of wireless control with classic (wired) control.
- The programming button on the controller is also used for manual control of the output.
- For components labeled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
- Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.