WSSC-12-F Wireless switch socket – classic (French)

Wireless switch socket – classic

Combination of iNELS wall-mounted wireless controller and switch socket.

RFWB-20/G

• The wireless controller is used to control switches and dimmers (lights, gates, garage doors, blinds, etc.).
• RFWB-20/G: two buttons enable the control one or two units independently (depending on the type of switching element).
• The flat design with a level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).

RFSC-61N

• The switched socket with 1 output channel is used to control fans, lamps, heaters, and appliances, which are connected by a power cord.
• They can be combined with detectors, controllers, iNELS RF Control system components.
• Thanks to the socket design, installation is simple by direct insertion into the existing socket.
• It enables connection of the switched load up to 16A (4.000 W).
• Multi-function design – button, impulse relay, and time function of delayed ON or OFF with time setting of 2 s – 60 min.
• The switched socket may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
• Produced 3 designs of sockets and plugs.