WSSL-14-BS-B | Wireless switch socket – luxury (British)

Wireless switch socket – luxury 

Combination of iNELS wall-mounted wireless controller and switch socket. It is used to control el. appliances, lights, fans, etc.

RFGB-40/B

• The wireless control – is used to control, lights, gates, garage doors, shutters, etc.
• The thickness is only 8 mm.
• 4 capacitive buttons allow you to control 4 components.
• Fast installation on any surface – the rear base allows screwing to the walls, gluing with double-sided tape, or just laying on the table

RFSC-61N

• The switched socket with 1 output channel is used to control fans, lamps, heaters, and appliances, which are connected by a power cord.
• They can be combined with detectors, controllers, iNELS RF Control system components.
• Thanks to the socket design, installation is simple by direct insertion into the existing socket.
• It enables connection of the switched load up to 16A (4.000 W).
• Multi-function design – button, impulse relay, and time function of delayed ON or OFF with time setting of 2 s – 60 min.
• The switched socket may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
• Produced 3 designs of sockets and plugs.