RFDSC-71N/British Dimming socket-plug

The dimmed socket is used to control light sources that are connected by a power cord – especially lamps:
R – classic lamps.
L – halogen lamps with wound transformer.
C – halogen lamps with electronic transformer.
ESL – dimmable energy-efficient fluorescent lamps.
LED – LED light sources (230V).
They can be combined with detectors, controllers, iNELS RF Control, or system components.
Thanks to the socket design, installation is simple by direct insertion into the existing socket.
Output load 200W.
Multi-function 6 light functions – smooth increase or decrease with time setting 2s-30 min.
When switched off, the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
Thanks to setting the min. brightness by a potentiometer, you will eliminate flashing of the LED and ESL light sources.
The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
The programming button on the socket is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20N or protocol component RFIO2 that supports this feature.
Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
You will find more on light sources and dimming options at www.elkoep.com/solutions.
Produced in 3 designs of sockets and plugs: French, Schuko, British