RFWB-40/GB On-wall button controller – 4 buttons black

RFWB-40/G | On-wall button controller PLASTIC – 4 buttons

On-wall button controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).

RFWB-40/G: four buttons enable control of four units independently.

The flat design with level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).

When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).

Sending a command is indicated by a red LED.

In LOGUS90 switch frame design (plastic, glass, wood, metal, stone).

Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.

Battery power supply (3 V CR 2032 battery – included in the supply) with battery life of around 5 years based on frequency of use.

Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.

Communication frequency with bidirectional protocol RFIO2.

RFWB enables communication (RFIO2) and can thus communicate with the CU3-02M.

Possibility to change the LOGUS90 design for both the cover and the frame.
Must be ordereds eparately. Order the mechanism HERE.

Choose from a wide range of color combinations of plastic frames or enjoy these natural materials:
glass, wood, metal, granite.

Technical parameters

Number of channels: 4
Power supply: 3 V battery CR 2032
Design: LOGUS90
Colour: in LOGUS90 variations
Dimensions: 85 x 85 x 16 mm
Protocol: RFIO2