RFDSC-71N/French Dimming socket-plug

RFDSC-71N/French| Dimming socket

• The dimmed socket is used to control light sources that are connected by a power cord – especially lamps:
  • R – classic lamps.
  • L – halogen lamps with wound transformer.
  • C – halogen lamps with electronic transformer.
  • ESL – dimmable energy-efficient fluorescent lamps.
  • LED – LED light sources (230V).
• They can be combined with detectors, controllers, iNELS RF Control, or system components.
• Thanks to the socket design, installation is simple by direct insertion into the existing socket.
• Output load 200W.
• Multi-function 6 light functions – smooth increase or decrease with time setting 2s-30 min.
• When switched off, the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
• Thanks to setting the min. brightness by a potentiometer, you will eliminate flashing of the LED and ESL light sources.
• The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20N or protocol component RFIO2 that supports this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
• You will find more on light sources and dimming options at www.elkoep.com/solutions.
• Produced in 3 designs of sockets and plugs: French, Schuko, British