RFSC-61N/French Switching socket-plug – multifunction

RFSC-61N | Switching socket-plug – multifunction

The switched socket is used to control fans, lamps, direct heaters, and appliances, which are connected by a power cord with a plug up to 16 A.
They can be combined with detectors, controllers, or iNELS RF Control system components.
Multifunctional design – button, impulse relay and time functions of a delayed start or return with time setting 2 s – 60 min.
The switched socket can be controlled by up to 32 channels.
The programming button on the socket also serves as a manual output control with indication.
Possibility to set the output status memory in case of failure and subsequent power recovery.
Range up to 200 m (outdoors) (in case of insufficient signal between the controller and the device, use the RFRP-20 signal repeater) or components with the RFIO2 protocol that support this function.
Communication with bidirectional RFIO2 protocol.
Thanks to the socket design, installation is simple and straightforward by plugging it into an existing socket.
The contact material of the AgSnO2 relay enables the switching of light ballasts.
Produced in 3 designs of sockets/plugs:
a) French (CZ, SK, PL, FR)
b) Schuko (HU, DE, RU, AT, RO, ES)
c) British (GB)

TECHNICAL PARAMETERS
Output: 1x switching, 16 A / AC1
Supply voltage (frequency): AC 230 V (50-60 Hz)
Protection: IP30
Dimension: 63 x 110 x 74 mm
Protocol: RFIO2